GF-09 GPS. Instruction.



Please read the instructions carefully before using. For correct installation and quick use, the productis subject to the real thing!

• Functions:

- remote pickup,
- remote recording,
- voice control callback,
- voice control recording,
- HD silicon microphone WiFi + LBS + AGPS positioning,
- real-time tracking,
- historical tracks,
- vibration anti-theft alarm,
- electronic fence,
- built-in strong magnetism,
- multiple power saving modes,
- low-power alarm,
- remote on / off AAP + computer terminal + short message operation.


Preparation before use

1. Check whether the equipment model is correct and whether the accessories are complete.
2. Select GSM network card or Nano SIM card of Internet of Things (CDMA telecommunication card is not supported ); GSM card is required to be enabled with the functions of GPRS, SMS and caller ID.
3. Start - up: For key-press host, press the key and hold for 3 seconds to start up; if no key, install SIM card and the device starts up, and the red light will flash slowly for 30 seconds before the device goes online.
4. Shutdown: For key-press host, press the key and hold for 3 seconds to shut down the device; if no key, unplug the SIM card, the device shuts down automatically 30 seconds later, and the red light goes out.

SMS Commands

000#number# - Binding master number
Example: 000#13812345678#
Up to three cell phone numbers are supported to bebound; dial the device from three cell phone numbers can realize pickup; you can also bind one cell phone number.
111 - SMS recording
Reply: Start recording 10
Record once, 10 min (for products with memory card)
555 - Turn off alt functions
Reply: Turn offl all functions
222 - Voice control recording
Reply: sound record 10
The device records automatically if 60 db are detected. Loop recording with 10 min each
333 - Ambient sound signal
Reply: record call alarm
GF-09 will call your number when it hears a suspicious sound

666 - Vibration alarm message
Reply: turn on motion sms alarm
The device automatically sends SMS to the master number when it detects vibration.
777 - Vibration alarm call
Reply: Vibration call alarm
The device automatically dials the master number when it detects vibration.
789 - Recording 10 seconds and upload to app
Reply: Sending voice
Operation and playback of recordings on app
999 - SMS positioning
Reply: I device location
Location of the device ( priority WiFi-AGPS-LBS)
md#seconds# - Modifying the second positioning upload interval
Reply: md#10# -OK
10-60 seconds supported
time#minutes - Modify the minute upload interval
Reply: time#
1-120 minutes supported
heartbeat#time# - Heartbeat packet time setting
Reply: heartbeat#time#
Data uploading by the device each time and online status 10-120 seconds supported
123#1 - Enabling track upload
Reply: OK/ON
Real upload is not enabled by default; send SMS to enable it
123#0 - Disabling track upload
Reply: OFF
pwrst - Factory password reset
123456
1122 - Reset
Reply: OK
The device is OK in 1 minute
imei# - Check IMEI number
15-digit number
If the IMEI barcode is lost, it can be retrieved by sending SMS
SYSRST# - Restart the device
Reply: Restart in 1 minute
LED#on / LED#off - Setting LED on/off
Reply: ON; OFF
LED#on / Turn on LED light / LED#off / Turn off LED light
Charging and automatic starting - When the device is in a low-battery shutdown state,connect it to power supply and it can start automatically if the voltage reaches 3.7V.

SOS - Holdthe SOS key for 4 seconds and the device calls theemergencycontact directly

GF-09 User Manual

3 comments:

  1. hi i need to configure the device for my own platform, in the manual said that is possible, but i send the command via sms an response OK but nothing happens

    ReplyDelete
  2. I am in South Africa
    My device shows I am in Vietnam
    Why would that be
    Also GPS shows quite a way off from where it really is

    ReplyDelete